RTCM Base Station
RTCM Base Station
Our RTCM base station is a high-quality solution to ensure the best possible performance of your RTK positioning system without any service provider costs.
The ANavS® RTCM base station provides correction data in standard RTCM format to guarantee precise positioning in every situation without any integration effort. It only requires a power supply and connected GNSS antenna, thus it is ready to use after a short calibration phase.
Due to its flexible connection options, the ANavS® RTCM base station is always beneficial for your RTK application.
A more advanced approach is to integrate the base station in a regional or global network. With an ANavS® RTCM base station you can be part of our cloud based RTCM service offering you easy integration due to LTE based server connection and streaming, independent of any company network policies.
The ANavS® RTCM base station comes in a robust, industrial casing with GNSS antenna and power cable. It is ready to use right away.
RTK corrections for all GNSS constallations
- GPS (L1C/A, L1C, L1PY, L2C, L2P, L5)
- Galileo (E1, E5a, E5b, E5 AltBoc, E6)
- GLONASS (L1CA, L2CA, L2P, L3)
- Beidou (B1I, B1C, B2a, B2I, B3)
- QZSS (L1C/A, L1C, L2C, L5, L6)
Faster convergence by integrated barometer
- Integrated Barometer
- Differential air pressure measurement for faster RTK convergence
Fully compatible to RTCM standard
- All messages according to RTCM 3 standard
- NTRIP Client:
Converts raw GNSS measurements into RTCM-formated corrections
- NTRIP Caster:
Streams RTCM corrections from base station to rovers via internet
Cloud based RTCM service
- Ensuring usability independent of any company’s network policy
- LTE based wireless communication for areas with mobile radio/ cellular networks
Why should I use the ANavS® RTCM Base Station instead of another correction service?
- Best-possible positioning performance:
The ANavS® RTCM base station and the ANavS® Multi-Sensor RTK module use the same GNSS receiver chip. Our differential processing eliminates all common receiver-internal errors and, thereby, ensures the possible positioning performance!
- Integrated barometer enables faster convergence:
The ANavS® RTK positioning system including the ANavS® RTCM base station and the ANavS® Multi-Sensor RTK module is the only available positioning system, that includes a barometer in both components and uses the differential air pressure measurements for getting an instantanous differential height information. This differential height information is then fully integrated in the tightly coupled sensor fusion.
- Access to corrections from further RTCM base stations via ANavS® Cloud Solution:
ANavS® customers can also get access to corrections from further RTCM base stations via our free of charge ANavS® cloud solution. Thus, you can benefit from a continuously growing network of reference stations without any extra costs.
- Autonomous operations in remote locations:
We also offer a mast system with solar power, solar charge controller, battery and Iridium-based satellite communication for operations in remote locations, where no permant power connection and no radio mobile/ cellular network are available.
- Low Costs:
The ANavS® RTCM base station is much cheaper than conventional geodetic reference stations. Moreover, you do not have any monthly fees of conventional RTK service providers, which are becoming quite expensive for extensive use.
- Calibration Services:
ANavS® offers to perform a remote recalibration of your ANavS® RTCM base station.